2/3/3.6/5M Triangle Sun Shade Sail Canopy for 98%UV Block Sun Shelter For Outdoor Facility& Activities Backyard Awning Camp Tent

HIGH QUALITY:
Made of 100% polyester fabric with PU coated(180 gsm), more healthy and safe. Resistant to water, tears and adverse weather conditions. Including three pad eyes. Free giving 3*1800D wind ropes (200cm for each), robust sewing processing on each side, stainless steel D ring on each edge, firmly guarantee fastness of installation.
UV PROTECTION:
Up to 98% UV protection and 90% Shading rate. Shade sails will lower the ambient air temperature reducing your properties cooling cost and energy consumption. The savings will pay for the Shade Sail's over time, with the right design.
WATER RESISTANT:
Water-resistant rating: 400mm HH (Water resistant, not waterproof); Air permeable, allowing a constant circulation of fresh air. Simple and safe installation with rope. Suggests that the installation angle is 20-40 degrees, to achieve maximum tension and also to allow rain to runs off. (Installation with hardware kit will be more convenient and stable.
EASY TO INSTALLATION:
Measure and clean the area where the shade sail is to be installed. Leave an allowance of 1.5-2ft between the fixing point and the shade sail to fit hardware/ hooks or ropes. Curved sides to enhance pull strength and prevent drooping, so the actual shading area would shrink slightly, tolerance 4~6 inches for each side. You could install different shade sails of different colors and sizes to get a larger shading area.
PRACTICAL & MULTIFUNCTIONAL:
Widely used over a patio, lawn, garden, pool, pond, deck, kailyard, courtyard, backyard, dooryard, park, carport, pergola, sandbox, driveway or another outdoor area. Its effectively reducing heat in your outdoor living areas.

Material: Polyester
Triangular Shade Sail Size:
XS:2x2x2M
S: 3x3x3m
M:3.6x3.6x3.6m
L:5x5x5M
Triangle shade sail: choose two sides higher than another side.
sun shade sail needs to be installed between 20°-40° angle to allow runoff.

Installation Notes:
1. The side with seams should be faced to the ground to avoid leakage.
2. This stage of installation is critical. You'd better ensure all the fixing points are steady in structure.
3. Fixing points could already exist, such as a large tree, fence post or fascia